ICR HH Product Family
Near-Field Microprobes up to 6 GHz
Short description
The near-field microprobe is designed for a high- resolution measurement of magnetic near fields. With the ICR -E probe the following measurements can be performed:
- Surface Scan via IC according to IEC 61967-3
- Volumenscan via IC
-Pin -Scan
The measuring coil within the ICR -RF probe head is vertically aligned to the measurment surface.
A preamplifier is integrated into the probe casing and powered by the Bias-Tee.
The ICR near field probes undergo a quality check before they are delivered. Different reference setup measurements are performed and a calibration curve is generated. Two different calibration curve are determined.
1)standardized calibration curve
2)H-field calibration curve
Caution: Due to its construction, the ICR probe is sensitive to shock and the delivery includes shipping and handling protection.
Scope of delivery
- 1x ICR HH100-27, Near-Field Microprobe 1.5 MHz to 6 GHz
- 1x ICR HH100-6, Near-Field Microprobe 2.5 MHz to 6 GHz
- 1x ICR HH150-27, Near-Field Microprobe 1.5 MHz to 6 GHz
- 1x ICR HH150-6, Near-Field Microprobe 2.5 MHz to 6 GHz
- 1x ICR HH250-6, Near-Field Microprobe 2.5 MHz to 6 GHz
- 1x ICR HH250-75, Near-Field Microprobe 0.5 MHz to 2 GHz
- 1x ICR HH500-6, Near-Field Microprobe 2 MHz to 6 GHz
- 1x ICR HH500-75, Near-Field Microprobe 200 kHz to 1 GHz
Technical parameters
| Frequency range | (0.5 ... 6) GHz |
| Resolution | (60 ... 300) µm |
Scope of delivery details
-
ICR HH100-27
Near-Field Microprobe 1.5 MHz to 6 GHz
The probe is used to measure magnetic fields at extremely high resolution and sensitivity. The optimal distance to the object being measured is < 1 mm. Using the ICR HH100-27, a higher output signal in the lower frequency range is generated (in comparison to ICR HH100-6). The measuring coil is horiz…
-
ICR HH100-6
Near-Field Microprobe 2.5 MHz to 6 GHz
The near-field microprobe is used to measure magnetic fields at extremely high resolution and sensitivity. The optimal distance to the object being measured is < 1 mm. The measuring coil is horizontally aligned within the probe head.
-
ICR HH150-27
Near-Field Microprobe 1.5 MHz to 6 GHz
The near-field microprobe is used to measure magnetic fields at extremely high resolution and sensitivity. The optimal distance to the object being measured is < 1 mm. Using the ICR HH150-27 a higher output signal in the lower frequency range is generated (in comparison to ICR HH150-6). The measurin…
-
ICR HH150-6
Near-Field Microprobe 2.5 MHz to 6 GHz
The near-field microprobe is used to measure magnetic fields at extremely high resolution and sensitivity. The optimal distance to the measuring object is < 1 mm. The measuring coil is horizontally aligned within the probe head.
-
ICR HH250-6
Near-Field Microprobe 2.5 MHz to 6 GHz
The near-field microprobe is used to measure magnetic near fields at extreme high resolution and sensibility. The optimal distance to the object being measured is < 1 mm. The measuring coil is horizontally placed within the probe head.
-
ICR HH250-75
Near-Field Microprobe 0.5 MHz to 2 GHz
The near-field microprobe is used to measure magnetic fields at extremely high resolution and sensitivity. The optimal distance to the object being measured is < 1 mm. Using the ICR HH250-75 a higher output signal in the lower frequency range is generated (in comparison to ICR HH250-6). The measurin…
-
ICR HH500-6
Near-Field Microprobe 2 MHz to 6 GHz
The near-field microprobe is used to measure magnetic near fields at extreme high resolution and sensibility. The optimal distance to the object being measured is < 1 mm. The measuring coil is horizontally placed with in the probe head.
-
ICR HH500-75
Near-Field Microprobe 200 kHz to 1 GHz
The near-field microprobe is used to measure magnetic near fields at extreme high resolution and sensibility. The optimal distance to the object being measured is < 1 mm. The ICR HH500-75 generates a higher output signal in the lower frequency range in comparision to ICR HH500-6. The measuring coil…