Preamplifier
To amplify the measurement signal and to protect your measurement receiver, we recommend the use of a preamplifier in the appropriate frequency range.
-
PA 2522 set
Preamplifier 10 MHz up to 22 GHz
The PA 2522 preamplifier was designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 2522 is to be used with the 50 ohm input of a spectrum analyzer or an oscilloscope and is powered by the plug-in power supply. With the correct cable …
-
PA 3010 set
Preamplifier 10 MHz up to 10 GHz
The PA 3010 preamplifier was designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 3010 is to be used with the 50 ohm input of a spectrum analyzer or an oscilloscope and is powered by the plug-in power supply. With the correct cable …
-
PA 306 SMA set
Preamplifier 100 kHz up to 6 GHz
The PA 306 SMA serves for amplifying measurement signals, for example weak signals from high-resolution near-field probes. The PA 306 is connected to the 50 Ω input of a spectrum analyzer or oscilloscope and supplied via the plug-in power supply unit included in delivery.
-
PA 303 N set
Preamplifier 100 kHz up to 3 GHz
The PA 303 N preamplifier was designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 303 N is to be used with the 50 ohm input of a spectrum analyzer or an oscilloscope and is powered by the wall-plug transformer. With the correct cab…
-
PA 303 SMA set
Preamplifier 100 kHz up to 3 GHz
The PA 303 SMA preamplifier is designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 303 is connected to the 50 ohm input of a spectrum analyzer or an oscilloscope and is powered by the wall-plug transformer. With the correct cable a…
-
PA 303 BNC set
Preamplifier 100 kHz up to 3 GHz
The PA 303 BNC preamplifier is designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 303 is connected to the 50 ohm input of a spectrum analyzer or an oscilloscope and is powered by the wall-plug transformer. With the correct cable a…
-
PA 203 SMA set
Preamplifier 100 kHz up to 3 GHz
The PA 203 preamplifier is designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 203 is connected to the 50 ohm input of a spectrum analyzer or an oscilloscope and is powered by the wall-plug transformer. With the correct cable, a ne…
-
PA 203 BNC set
Preamplifier 100 kHz up to 3 GHz
The PA 203 BNC preamplifier is designed for the amplification of measuring signals, e.g. weak signals of near-field probes with high resolution. The PA 203 is connected to the 50 ohm input of a spectrum analyzer or an oscilloscope and is supplied by the wall-plug transformer. With the correct cable…