Analog
The optical fibre probes are used to transmit analog signals from the device under test under the influence of EFT/burst disturbance.
-
A100-1 set
Optical Fiber Probe 1-channel, 25 kHz
The A100-1 set is used for oscillating analog signals under EFT/ESD/RF interference. The set is particularly suitable for the measurement of analog signals when testing the immunity of electrical or electronical devices (equipment) against high-frequency electromagnetic fields (IEC 61000-4-3 to IEC …
-
A100-2 set
Optical Fiber Probe 2-Channel, 25 kHz
The A100-2 set is used for oscillographing analog signals under EFT/ESD/RF interference. The set is particularly suitable for the measurement of analog signals when testing the immunity of electrical or electronical devices (equipment) against high frequency electromagnetic fields (IEC 61000-4-3 to …
-
A200-1 set
Optical Fiber Probe 1-channel, 500 kHz
The A200-1 set consits of a sensor, which allows for oscilloscopically displaying analog signals under EFT/ESD/RF interference potential free. Disturbed signals can be easily detected. In the device under test the sensor transforms the measured analog signals into optical signals. The optical signal…
-
A200-2 set
Optical Fiber Probe 2-Channel, 500 kHz
The A200-2 set consists of two sensors which allow for potential free transmission of analog signals under EFT/ESD/RF interference. The signals are displayed on an oscilloscope. Disturbed signals can be easily detected. In the device under test the sensor transforms the measured logic signals into o…
-
A300-1 set
Optical Fiber Probe 1-channel, 5 MHz
The A300-1 set consists of a sensor, which allows for oscilloscopically displaying analog signals under EFT/ESD/RF interference potential free. Disturbed signals can be easily detected. In the device under test the sensor transforms the measured analog signals into optical signals. The optical signa…
-
A300-2 set
Optical Fiber Probe 2-Channel, 5 MHz
The A300-2 set consits of two sensors, which allow for displaying oscilloscopically analog signals under EFT/ESD/RF interference potential free. Disturbed signals can be easily detected. In the device under test the sensor transforms the measured logic signals into optical signals. The optical signa…